Table of Contents
Advertisement
Chapter 10. Statistics
Px Type (listed for each interval)
The protocol type being examined for the given interval is
displayed in this field.
When the P
page 9-4) the new selection is not accepted by the TSU IQ+ until the end
of the current timed interval. For example, if the TSU IQ+ is configured
for 5-minute timed intervals, and the P
changed at 12:25, the change will not be recognized until 12:30. This al-
lows the unit to display an accurate interval history of the P
T
When the P
field (P1 T
on the V
displayed information represents more than one protocol type. Mixed is
also displayed for the day total on the V
hour period is complete.
Px Rx Frames
In the Network Port view, this is the number of frames received on
the network port that match the selected protocol type. In the DLCI
view, this is the number of frames received on a particular DLCI
that match the selected protocol type.
Px Rx Bytes
In the Network Port view, this is the number of bytes received on
the network port that match the selected protocol type. In the DLCI
view, this is the number of bytes received on a particular DLCI that
match the selected protocol type.
Px Rx Dist%
The distribution percentages show what portion of the data can be
attributed to the protocols being tracked.
Px Tx Frames
In the Network Port view, this is the number of frames transmitted
on the network port that match the selected protocol type. In the
DLCI view, this is the number of frames transmitted on a particular
DLCI that match the selected protocol type.
10-18
type selection is changed (see Protocols 1 and 2 on
ROTOCOL
field.
YPE
type selection is changed, the P
ROTOCOL
or P2 T
YPE
I
IEW BY
NTERVAL
TSU IQ+ User Manual
ROTOCOL
) for the current day total (left-most column
YPE
screens) displays MIXED, indicating that the
IEW BY
type selection is
ROTOCOL
T
ROTOCOL
YPE
D
screen once the 24
AY
61200275L1-1
Advertisement
Table of Contents
