Table of Contents
Advertisement
•
For Layer 3 tracking to function, the data must be RFC-1490
encapsulated data or RFC-2427 encapsulated data (RFC-2427
superseded RFC-1490). For an IP packet to be recognized, it must
be carried by an RFC-2427 IP header or an RFC-2427 SNAP header
for bridged ethernet. If the SNAP header is carrying a bridged
ethernet packet, the MAC header is examined for the protocol type.
SNAP headers are also examined for IPX and ARP traffic.
The ARP option actually tracks inverse ARP where addresses are resolved
across the WAN link. SNA traffic is recognized by its RFC-2427 header.
Information is gathered for the two protocol types you choose and
is displayed with P1 representing information for P
P2 representing information for P
There are four different views of the Layer 3 Statistics:
•
•
•
•
Descriptions of the fields found in these menus follow. Field
descriptions are the same for both protocol selections, so "x"
represents the protocol number.
Px Type (current)
The protocol type currently selected in the C
displayed in this field.
Interval Remaining
Number of seconds remaining in the current timed interval.
61200275L1-1
SNA-Peripheral (FID2) without Layer 2 (LLC2)
SNA-APPN without Layer 2 (LLC2)
SNA-Netbios without Layer 2 (LLC2)
SNA-HPR without Layer 2 (LLC2)
ARP
Network Port, View by Interval
Network Port, View by Day
DLCI, View by Interval
DLCI, View by Day
TSU IQ+ User Manual
Chapter 10. Statistics
ROTOCOL
2.
ROTOCOL
ONFIGURATION
1 and
menu is
10-17
Advertisement
Table of Contents
