Table of Contents
Advertisement
Firmware Panel
The Firmware panel (see figure 35,
and the date it was last updated. Update the firmware on the FOX3 SR 301/311 from this
panel (see
To update firmware:
In the Firmware panel, click the SELECT
1.
FILE button (see figure 42).
In the Open dialog box, browse to locate
2.
the new firmware file on your computer (by
default the file is stored at C:\Program
Files (x86)\Extron\Firmware\
FOX3 SR 301/311 after being downloaded
from www.extron.com).
NOTE: Firmware files for FOX3 SR
301 and FOX3 SR 311 have a .eff
extension. Do not attempt to load any
other file types.
3.
Double-click the firmware file name. The
Open window closes, and the selected
firmware file name appears in the Update
Firmware panel on the web page.
4.
Click INSTALL to begin.
To cancel the update, click the X button in the Update Firmware panel.
During the updating process, a window appears in the middle of the screen, showing
messages giving the progress of the update: Initializing, Installing the
Firmware, and Rebooting Device.
When the update is completed, the message window closes and the message Firmware
Upload Complete appears near the top of the screen. The new firmware filename appears
beside Version in the Firmware panel.
7
Software/Firmware Installation
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Internal Web Page
on page 42) displays the current firmware version
on page 32 to download the firmware files).
Figure 42.
Firmware Panel
46
Advertisement
Table of Contents
