Trust Domain For Ip Passthrough - ZyXEL Communications Nebula LTE3301-PLUS User Manual

The following table describes the fields in this screen.
Table 123 Maintenance > Remote Management > MGMT Services for IP Passthrough
LABEL
Service
WAN
Trust Domain
Port
Apply
Cancel

29.6 Trust Domain for IP Passthrough

Use this screen to view a list of public IP addresses/complete domain names which are allowed to
access the Zyxel Device in IP Passthrough mode. IP Passthrough allows Internet traffic to go to a LAN
computer behind the Zyxel Device without going through NAT. Make sure to enable IP Passthrough in
Network Setting > Broadband > Cellular IP Passthrough.
Click Maintenance > Remote Management > Trust Domain for IP Passthrough to open the following
screen.
Figure 185 Maintenance > Remote Management > Trust Domain for IP Passthrough
The following table describes the fields in this screen.
Table 124 Maintenance > Remote Management > Trust Domain for IP Passthrough
LABEL
Add Trust Domain
IP Address
Delete
Chapter 29 Remote Management
DESCRIPTION
This is the service you may use to access the Zyxel Device.
Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from all WAN connections.
Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from the trusted host IP address.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click Apply to save your changes back to the Zyxel Device.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trusted host IP address.
Nebula Mobile Router User's Guide
281