ZyXEL Communications Nebula LTE3301-PLUS User Manual page 47

Table 18 Navigation Panel Summary (continued)
LINK TAB
MAC
Authentication
WPS
WMM
Others
WLAN Scheduler
Channel Status
Home LAN Setup
Networking
Static DHCP
UPnP
Custom DHCP
Routing Static Route
DNS Route
Policy Route
RIP
NAT Port Forwarding
Port Triggering
DMZ
ALG
DNS DNS Entry
Dynamic DNS
USB USB Service
VLAN Group VLAN Group
Interface Interface
Grouping
Grouping
Nebula Nebula
Security
Firewall General
Protocol
Access Control
DoS
MAC Filter MAC Filter
Chapter 3 Web Configurator
FUNCTION
Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.
Use this screen to configure and view your WPS (WiFi Protected Setup)
settings.
Use this screen to enable or disable WiFi MultiMedia (WMM).
Use this screen to configure advanced wireless settings.
Use this screen to create rules to schedule the times to permit Internet
traffic from each wireless network interfaces.
Use this screen to scan wireless LAN channel noises and view the results.
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Use this screen to assign specific IP addresses to individual MAC
addresses.
Use this screen to turn UPnP and UPnP NAT-T on or off.
Use this screen to configure additional DHCP options.
Use this screen to view and set up static routes on the Zyxel Device.
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS servers.
Use this screen to configure policy routing on the Zyxel Device.
Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
Use this screen to make your local servers visible to the outside world.
Use this screen to change your Zyxel Device's port triggering settings.
Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
Use this screen to enable the ALGs (Application Layer Gateways) in the
Zyxel Device to allow applications to operate through NAT.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP address.
Use this screen to enable file sharing through the Zyxel Device.
Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.
Use this screen to map a port to create multiple networks on the Zyxel
Device.
Use this screen to enable Nebula Discovery and configure proxy server
settings.
Use this screen to configure the security level of your firewall.
Use this screen to add Internet services and configure firewall rules.
Use this screen to enable specific traffic directions for network services.
Use this screen to activate protection against Denial of Service (DoS)
attacks.
Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.
Nebula Mobile Router User's Guide
47