ZyXEL Communications Nebula LTE3301-PLUS User Manual page 241

Figure 158 Security > Parental Control > Add or Edit PCP (Network Service & Site/URL Keyword)
The following table describes the fields in this screen.
Table 99 Security > Parental Control >Add or Edit PCP
LABEL DESCRIPTION
General
Active Select Enable or Disable to activate or deactivate the parental control rule.
Parental Control Enter a descriptive name for the rule.
Profile Name
Home Network Select the LAN user that you want to apply this rule to from the drop-down list box. If you select
User Custom, enter the LAN user's MAC address. If you select All, the rule applies to all LAN users.
Rule List In Home Network User, select Custom, enter the LAN user's MAC address, then click the Add
icon to enter a computer MAC address for this PCP. Up to five are allowed. Click the Delete icon
to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the Zyxel Device to perform parental control.
Time (Start–End) Drag the time bar to define the time that the LAN user is allowed access (Authorized access) or
denied access (No access).
Add New Time Click this to add a new time bar. Up to three are allowed.
Network Service
Network Service If you select Block, the Zyxel Device prohibits the users from viewing the web sites with the URLs
Setting listed below.
If you select Allow, the Zyxel Device blocks access to all URLs except ones listed below.
Add New Click this to show a screen in which you can add a new service rule. You can configure the
Service Service Name, Protocol, and Port of the new rule, as shown in
# This shows the index number of the rule.
Service Name This shows the name of the rule.
Protocol:Port This shows the protocol and the port of the rule.
Chapter 19 Parental Control
Nebula Mobile Router User's Guide
241
Figure 159.