ZyXEL Communications Nebula LTE3301-PLUS User Manual page 167

Table 57 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION
IP Address Enter the IPv4 IP address of the actual remote DHCP server in this field.
IP Addressing Values
The IP Addressing Values fields appear only when you select Enable in the DHCP field.
Beginning IP This field specifies the first of the contiguous addresses in the IP address pool.
Address
Ending IP Address This field specifies the last of the contiguous addresses in the IP address pool.
Auto reserve IP for Enable this if you want to reserve the IP address for the same host.
the same host
DHCP Server Lease Time
This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP addresses to clients when
they log in. DHCP centralizes IP address management on central computers that run the DHCP server program.
DHCP leases addresses, for a period of time, which means that past addresses are "recycled" and made available
for future reassignment to other systems.
This field is only available when you select Enable in the DHCP field.
Days/Hours/Minutes DHCP server leases an address to a new device for a period of time, called the DHCP lease
time. When the lease expires, the DHCP server might assign the IP address to a different
device.
DNS Values
This field appears only when you select Enable in the DHCP field.
DNS The Zyxel Device supports DNS proxy by default. The Zyxel Device sends out its own LAN IP
address to the DHCP clients as the first DNS server address. DHCP clients use this first DNS
server to send domain-name queries to the Zyxel Device. The Zyxel Device sends a response
directly if it has a record of the domain-name to IP address mapping. If it does not, the Zyxel
Device queries an outside DNS server and relays the response to the DHCP client.
Select DNS Proxy to have the DHCP clients use the Zyxel Device's own LAN IP address. The
Zyxel Device works as a DNS relay.
Select Static if you have the IP address of a DNS server. Enter the DNS server's IP address in
the field to the right.
Select From ISP if your ISP dynamically assigns DNS server information (and the Zyxel Device's
WAN IP address).
LAN IPv6 Mode Setup
IPv6 Active Use this to enable or disable IPv6 activation on the Zyxel Device.
When IPv6 activation is used, the following fields need to be set.
Link Local Address A link-local address uniquely identifies a device on the local network (the LAN). It is similar to
Type a "private IP address" in IPv6. You can have the same link-local address on multiple
interfaces on a device. A link-local unicast address has a predefined prefix of fe80::/10. The
link-local unicast address format is as follows. Select EU
generate an interface ID for the LAN interface's link-local address using the EU
Otherwise, enter an interface ID for the LAN interface's link-local address if you select
Manual.
EUI64 Select this to have the Zyxel Device generate an interface ID for the LAN interface's link-
local address using the EUI-64 format.
Manual Select this to manually enter an interface ID for the LAN interface's link-local address.
Chapter 9 Home Networking
Nebula Mobile Router User's Guide
167
I 64 to allow the Zyxel Device to
I -64 format.