ZyXEL Communications Nebula LTE3301-PLUS User Manual page 137

Figure 81 Wireless > General: More Secure: WPA3-SAE/WPA2-PSK
The following table describes the labels in this screen.
Table 45 Wireless > General: More Secure: WPA3-SAE/WPA2-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable data encryption.
Security Mode Select a security mode from the drop-down list box.
Generate Select this option to have the Zyxel Device automatically generate a password. The password
password field will not be configurable when you select this option.
automatically
Password Select Generate password automatically or enter a Password.
The password has two uses.
1. Manual. Manually enter the same password on the Zyxel Device and the client. Enter 8 – 63
ASCII characters or exactly 64 hexadecimal ('0 – 9', 'a – f') characters.
2. WPS. When using WPS, the Zyxel Device sends this password to the client.
Note: Enter 8
accepted for WPS.
Click the Eye icon to show or hide the password for your wireless network. When the Eye icon is
slashed
Strength This displays the current password strength – weak, medium, strong.
more... Click this
Encryption
AES is the default data encryption type, which uses a 128-bit key.
Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your WiFi clients can all use AES.
Select TKIP+AES to allow the WiFi clients to use either TKIP or AES.
Note: Not all models support TKIP+AES encryption.
Timer This is the rate at which the RADIUS server sends a new group key out to all clients.
Chapter 8 Wireless
63 ASCII characters only. 64 hexadecimal characters are not
–
, you'll see the password in plain text. Otherwise, it is hidden.
to show more fields in this section. Click this
Nebula Mobile Router User's Guide
137
to hide them.