Cellular Wan - ZyXEL Communications Nebula LTE3301-PLUS User Manual

7.4 Cellular WAN

Click Network Setting > Broadband > Cellular WAN to display the following screen. Use this screen to
enable data roaming and network monitoring when the Zyxel Device cannot ping a base station.
Note: Roaming charges may apply when Data Roaming is enabled.
Figure 64 Network Setting > Broadband > Cellular WAN
The following table describes the fields in this screen.
Table 29 Network Setting > Broadband > Cellular WAN
LABEL
Data Roaming
Network Monitoring Feature
Chapter 7 Broadband
DESCRIPTION
Click this to enable ( ) data roaming on the Zyxel Device.
With cellular roaming, a SIM card works in areas which are not covered by the SIM's service
provider. Enable roaming to keep the Zyxel Device connected to the Internet when you are
traveling outside the geographical coverage area of the network to which you are registered,
such as a different country.
Note: Roaming charges may apply when Data Roaming is enabled.
Nebula Mobile Router User's Guide
114