ZyXEL Communications Nebula LTE3301-PLUS User Manual page 225

Each field is described in the following table.
Table 89 Network Setting > Nebula
LABEL DESCRIPTION
Nebula Slide the switch to the right to enable Nebula Discovery to have the Zyxel Device try to connect
Discovery to the NCC. Once the Zyxel Device is connected to and has registered in the NCC, it'll go into
the Nebula cloud management mode.
If Nebula Discovery is disabled, the Zyxel Device will not discover the NCC and remain in
standalone operation.
This is not configurable and will only display ON when your Zyxel Device is being managed by
NCC.
Use Proxy to If the Zyxel Device is behind a proxy server, slide the switch to the right to enable this feature.
Access to NCC Configure the proxy server settings so the Zyxel Device can access the NCC through the proxy
server.
Proxy Server Enter the IP address of the proxy server.
Proxy Port Enter the service port number used by the proxy server.
Authentication Enable this if the proxy server requires authentication before it grants access to the NCC.
User Name Enter you proxy user name.
Password Enter your proxy password.
Apply Click Apply to save your changes back to the Zyxel Device.
Cancel Click Cancel to set the settings in this screen back to default.
Chapter 16 Nebula
Nebula Mobile Router User's Guide
225