Trust Domain; Add Trust Domain - ZyXEL Communications LTE Series User Manual

The following table describes the fields in this screen.
Table 59 Maintenance > Remote Management > MGMT Services for IP Passthrough
LABEL
Service
WAN
Port
Cancel
Apply

20.4 Trust Domain

View a list of public IP addresses which you want to allow access to the Zyxel Device through the
services configured in this screen. Click Maintenance > Remote Management > Trust Domain to open
the following screen.
Note: If this list is empty, all public IP addresses can access the Zyxel Device from the WAN
through the specified services.
Figure 100 Maintenance > Remote Management > Trust Domain
The following table describes the fields in this screen.
Table 60 Maintenance > Remote Management > Trust Domain
LABEL
Add Trust
Domain
IP Address
Delete

20.5 Add Trust Domain

Configure a public IP address which you want to allow access to the Zyxel Device. Click the Add Trust
Domain button in the Maintenance > Remote Management > Trust Domain screen to open the following
screen.
Chapter 20 Remote Management
DESCRIPTION
This is the service you may use to access the Zyxel Device.
Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from all WAN connections.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes back to the Zyxel Device.
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trusted host IP address.
LTE Series User's Guide
131