Module Upgrade - ZyXEL Communications Nebula LTE3301-PLUS User Manual

Figure 195 Error Message

34.3 Module Upgrade

This screen lets you upload new firmware specific to the built-in LTE module in order to improve the LTE
module's reliability and performance. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take more than 3 minutes. After a successful upload, the Zyxel Device will reboot.
Click Maintenance > Firmware Upgrade > Module Upgrade to open the following screen.
Figure 196 Maintenance > Firmware Upgrade > Module Upgrade
The following table describes the labels in this screen.
Table 132 Maintenance > Firmware Upgrade > Module Upgrade
LABEL
Upgrade Cellular Module Firmware
Current
Module
Version
Choose file...
Choose File/
Browse
Upload
Chapter 34 Firmware Upgrade
DESCRIPTION
This is the current module firmware version.
Enter the location of the file you want to upload in this field or click Choose File/Browse to find
it.
Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take more than 3 minutes.
Nebula Mobile Router User's Guide
298