ZyXEL Communications Nebula LTE3301-PLUS User Manual page 55

In this example, configure the following information for the Ethernet connection.
1
General
Name
Type
Connection Mode
Encapsulation (Internet
Type)
IPv6/IPv4 Mode
Enter the General settings provided by your Internet service provider.
2
Enter a Name to identify your WAN connection.
2a
Set the Type to Ethernet.
2b
Set your Ethernet connection Mode to Routing.
2c
Choose the Encapsulation specified by your Internet service provider. For this example, select IPoE
2d
as the WAN encapsulation type.
Set the IPv4/IPv6 Mode to IPv4 Only.
2e
Under Routing Feature, enable NAT and Apply as Default Gateway.
3
For the rest of the fields, use the default settings.
4
Click Apply to save your settings.
5
Chapter 5 Web Interface Tutorials
My ETH Connection
Ethernet
Routing
IPoE
IPv4 Only
Nebula Mobile Router User's Guide
55