Cellular Problems - ZyXEL Communications Nebula LTE3301-PLUS User Manual

I cannot connect to the Zyxel Device using FTP, Telnet, SSH, or Ping.
Telnet, SSH and Ping) to access the Zyxel Device.
1
Check the server Port number field for the web service in the Maintenance > Remote Management
2
screen. You must use the same port number in order to use that web service for remote management.
Try the troubleshooting suggestions for
3
suggestions about your browser.

37.4 Cellular Problems

The SIM card cannot be detected.
Disconnect the Zyxel Device from the power supply.
1
Remove the SIM card from its slot.
2
Clean the SIM card slot of any loose debris using compressed air.
3
Clean the gold connectors on the SIM card with a clean lint-free cloth.
4
Insert the SIM card into its slot and connect the Zyxel Device to the power supply to restart it.
5
I get an Invalid SIM card alert.
Make sure you have an active plan with your ISP.
1
Make sure that the Zyxel Device is in the coverage area of a cellular network.
2
I get a weak cellular signal.
Find the location of your nearest cellular base stations, then install the Zyxel Device towards the direction
1
of those sites. The nearest site or site with a direct line-of-sight is usually preferred.
Note: It is best to test towards more than one cellular site, as the nearest site / line-of-sight is
not always the best due to the terrain, interference, density of usage, and so on. All of
these factors influence the stability, availability and throughput of the link to the Zyxel
Device
Chapter 37 Troubleshooting
I cannot access the Web Configurator login screen.
.
Nebula Mobile Router User's Guide
312
Ignore the