ZyXEL Communications Nebula LTE3301-PLUS User Manual page 221

Figure 145 Network Setting > USB Service
Note: The Share Directory List is only visible when you connect a USB device.
Each field is described in the following table.
Table 87 Network Setting > USB Service
LABEL DESCRIPTION
Information
Volume This is the volume name the Zyxel Device gives to an inserted USB device.
Capacity This is the total available memory size (in megabytes) on the USB device.
Used Space This is the memory size (in megabytes) already used on the USB device.
Server Configuration
File Sharing Click this switch to enable or disable file sharing through the Zyxel Device. When the switch goes
Services to the right
Share Directory List
Add New Share Click this to set up a new share on the Zyxel Device.
Active Select this to allow the share to be accessed.
Status This field shows the status of the share
: The share is not activated.
: The share is activated.
Share Name This field displays the name of the file you shared.
Chapter 15 USB Service
, the function is enabled.
Nebula Mobile Router User's Guide
221