ZyXEL Communications Nebula LTE3301-PLUS User Manual page 104

Figure 57 LAN
Click the Arrow icon ( ) to configure the LAN IP settings and DHCP setting for your Zyxel Device.
Figure 58 LAN Setup
Each field is described in the following table.
Table 25 LAN Setup
LABEL DESCRIPTION
Group Name Select the interface group you want to use. Usually Default.
LAN IP Setup
IP Address Enter the LAN IPv4 IP address you want to assign to your Zyxel Device in dotted decimal
notation, for example, (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP Address you enter, so do not change this field unless you are instructed to do so.
IP Addressing Values
Beginning IP This field specifies the first of the contiguous addresses in the IP address pool.
Address
Chapter 6 Connection Status
Nebula Mobile Router User's Guide
104