Quick Start Setup - Wifi - ZyXEL Communications Nebula LTE3301-PLUS User Manual

Figure 38 Wizard – Time Zone
4.4 Quick Start Setup – WiFi
Turn WiFi on or off. If you keep it on, record the WiFi Name and Password in this screen so you can
configure your WiFi clients to connect to the Zyxel Device. If you want to show or hide your WiFi
password, click the Eye icon (
Click the Keep 2.4G and 5G the same check box to use the same SSID for 2.4G and 5G WiFi networks.
Otherwise, deselect the check box to have two different SSIDs for 2.4G and 5G WiFi networks. The screen
and fields to enter may vary when you select or deselect the check box.
Figure 39 Wizard – WiFi
Note: Only the LTE3301-PLUS supports the Country feature.
Note: You can also enable the wireless service using any of the following methods:
Click Network Setting > Wireless to open the General screen. Then select Enable in the
WiFi field. Or, press the WiFi ON/OFF button for more than 5 seconds.
Chapter 4 Quick Start
).
Nebula Mobile Router User's Guide
52