Agilent Technologies 1290 Infinity User Manual page 60

4
Using the Module
Software Configuration
Position switch at end of run
Gives you the possibility to define a position the valve is switched to at the end
of the run.
Position Names
Define the Position Names that is used for the method report and the
instrument actuals. The Position Description is limited to 19 characters.
Time Table
The Time Table can be used to edit and run a valve program during a sequence
of sample runs. The Time Table contains 3 columns (Line, Time and Position).
The Time Table is limited to 20 lines. The number of selection in the Position
column depends on the valve that has been configured.
Position X
Next Position
Insert
Append
Cut
Copy
Paste
60
Switches the valve to the selected position.
Switches to the next available position. If the
valve is on the highest position it will switch to
position 1.
Inserts a line in the Time Table above the
selected position.
Appends a line at the end of the Time Table.
Cuts the selected line(s) out of the Time Table
and saves it to the clipboard.
Copies the selected line(s) from the table to the
clipboard.
Pastes line(s) from the Clipboard to the Time
Table.
Agilent 1290 Infinity Valve Drive and Valve Heads