Agilent Technologies 1290 Infinity User Manual page 14

1
Introduction to the Agilent 1290 Infinity Valve Drive and Valve Heads
Typical Applications
Multi Column Selection
With the 6 position selection valve (G4234A/B) and the capillary kit for
Column Selection you can set up your system for use with up to 6 columns as
displayed in
and one flow path for flow injection analysis or for flushing the system. This
setup allows you to switch between these columns for faster method
development or method validation. The multi-column setup might also be
used, if several operators are sharing system.
Figure 3
14
Figure 3 on page 14. Or you can use the system with 5 columns
Multiple Column Selection (Example of Schematic Setup for 6 Column
Selector)
Agilent 1290 Infinity Valve Drive and Valve Heads