Agilent Technologies 1290 Infinity User Manual page 138

10
Hardware Information
Interfaces
Table 20 Agilent 1200 Infinity Series Interfaces
Module
G1314E/F VWD
G4212A/B DAD
G1315C DAD VL+
G1365C MWD
G1315D DAD VL
G1365D MWD VL
G1321B FLD
G1362A RID
G4280A ELSD
Others
G1170A Valve Drive
G1316A/C TCC
G1322A DEG
G1379B DEG
G4225A DEG
G4227A Flex Cube
G4240A CHIP CUBE
The detector (DAD/MWD/FLD/VWD/RID) is the preferred access point for control via
N O T E
LAN. The inter-module communication is done via CAN.
138
CAN LAN/BCD LAN
(optional) (on-board)
2 No Yes
2 No Yes
2 No Yes
2 Yes No
No No No
2 No No
2 No No
No No No
No No No
No No No
2 No No
2 Yes No
RS-232 Analog APG
Remote
Yes 1 Yes
Yes 1 Yes
Yes 2 Yes
Yes 1 Yes
Yes Yes Yes
No No No
Yes No Yes
No No Yes
Yes No Yes
Yes No Yes
No No No
Yes No Yes
Agilent 1290 Infinity Valve Drive and Valve Heads
Special
EXT Contact
AUTOZERO
Requires a HOST
module with on-board
LAN (e.g. G4212A or
G4220A with minimum
firmware B.06.40 or
C.06.40) or with
additional G1369C LAN
Card
AUX
CAN-DC- OUT for CAN
slaves
THERMOSTAT for
G1330A/B (NOT USED)