Agilent Technologies 1290 Infinity User Manual page 41

Mounting the Valve to a G1383A Column Organizer
For more information about the column organizer read the G1383-90011 Column Organizer
N O T E
Quick Reference Guide
1 Attach the column stand mount to the column organizer.
2 Attach both clamps to one side of the valve drive.
3 Install the leak tray and leak sensor to the valve.
4 Slide the valve onto the column stand mount.
5 Attach the waste tubing to the leak plane and guide it to a proper waste
6 Connect the power cable to the power connector at the rear of the module.
7 Connect the CAN interface connection to one of the CAN ports at the rear
8 Power on the module by switching the Power button at the rear of the
Agilent 1290 Infinity Valve Drive and Valve Heads
container.
of the module.
module if a valve head has been already installed. Otherwise continue with
'Installing Valve heads.
Installing the Module
Installing the Valve Drive
3
41