Agilent Technologies 1290 Infinity User Manual page 22

1
Introduction to the Agilent 1290 Infinity Valve Drive and Valve Heads
Bio-inert Materials
Table 2
Module
Bio-inert Flow Cells:
Standard flow cell bio-inert, 10 mm, 13 µl, 120 bar (12 MPa)
for MWD/DAD, includes Capillary Kit Flow Cells BIO (p/n
G5615-68755) (p/n G5615-60022) (for Agilent 1260 Infinity
Diode Array Detectors DAD G1315C/D)
Max-Light Cartridge Cell Bio-inert (10 mm, V(
G5615-60018) and
Max-Light Cartridge Cell Bio-inert (60 mm, V(
G5615-60017) (for Agilent 1200 Infinity Series Diode Array
Detectors DAD G4212A/B)
Bio-inert flow cell, 8 µL, 20 bar (pH 1–12) includes Capillary Kit
Flow Cells BIO (p/n G5615-68755) (p/n G5615-60005) (for
Agilent 1260 Infinity Fluorescence Detector FLD G1321B)
Bio-inert heat-exchanger G5616-60050 for 1290 Infinity
Thermostatted Column Compartment
(G1316C)
Bio-inert Valve heads
Bio-inert Connection capillaries
To ensure optimum bio-compatibility of your Agilent 1260 Infinity Bio-inert LC system, do
N O T E
not include non-inert standard modules or parts to the flow path. Do not use any parts that
are not labeled as Agilent "Bio-inert". For solvent compatibility of these materials, see
"Solvent information for parts of the 1260 Infinity Bio-inert LC system"
22
Bio-inert Materials
Materials
PEEK, ceramic, sapphire, PTFE
PEEK, fused silica

) 1.0 µl) (p/n

) 4.0 µl) (p/n
PEEK, fused silica, PTFE
PEEK (steel-cladded)
G4235A, G5631A, G5639A: PEEK,
ceramic (Al
Upstream of sample introduction:
• Titanium
Downstream of sample
introduction:
• Agilent uses
stainless-steel-cladded PEEK
capillaries, which keep the flow
path free of steel and provide
pressure stability to more than
600 bar.
Agilent 1290 Infinity Valve Drive and Valve Heads
O based)
2 3
on page 54.