Assembling and Installing the Leak Tray and Leak Sensor
Only connect or disconnect the leak sensor while the valve drive is powered off.
N O T E
The valve drive must be 'powered off' for at least 10 s to recognize any hardware changes
correctly.
1
Attach the leak tray clamp to the leak tray.
3
Slide the leak tray onto the bottom of the valve drive.
Agilent 1290 Infinity Valve Drive and Valve Heads
2
Push the leak sensor into its holder.
4
Connect the leak sensor cable to the valve drive.
Installing the Module
Installing the Valve Drive
3
37