Agilent Technologies 1290 Infinity User Manual page 59

4
Using the Module
Software Configuration
Possible Method Settings for the Valve
Figure 9 Method settings of the Valve
After the Agilent 1290 Series Valves have been installed and configured, the
valve parameters can be edited in the software. Choose Method by right
clicking on the the valve's GUI icon or via 'Edit entire method' under the menu
to open the valve dialog box as displayed Figure 9 on page 59.
Position
When loading a method the valve is switched to the position that is displayed
in the Position dropdown box. If you select Use Current, the valve remains in
the current position, when a new method is loaded.
If you select a new position in the dropdown box and click OK, the Setup Valve
dialog box will be closed and the valve switches to the new position.
Agilent 1290 Infinity Valve Drive and Valve Heads 59