Agilent Technologies 1290 Infinity User Manual page 47

3
When the outer pin is locked into the groove, manually
screw the nut onto the valve head.
4
Install all required capillary connections to the valve.
6
Power on or power-cycle your TCC or Infinity valve drive that the valve head gets recognized during the module
initialization.
Agilent 1290 Infinity Valve Drive and Valve Heads
N O T E
Fasten the nut manually. Do not use any tools.
5
Push the valve head until it snaps in and stays in the rear
position. (TCC only)
Installing the Module
Installing the Valve Heads
3
47