Removing A Flash Memory Option - Lexmark Optra Color 45 User Manual

Installing Options

Removing a Flash Memory Option

226
Chapter 9: Memory and Option Cards
Before you remove a flash memory option, follow the steps under
"Accessing the Printer System Board on the Back of the Printer" on
page 219.
The flash memory option is easily damaged by
W :
ARNING
static electricity. Touch something metal
before you touch the flash memory option.
Complete the following steps if you need to remove a flash
memory option before you install a new one:
1
Locate and remove the code SIMM card from the printer
system board.
Note: The removal of the code SIMM card is exactly like
the removal of a flash memory option. Complete the
following steps to remove a code SIMM card.
2
Push the metal clips at each end of the connector away
from the flash memory option.
Clip
Clip