Display Problems - Lexmark Optra M410 User Manual

Display Problems

Problem
status message
Menus Disabled
appears on the display.
Display shows only diamonds or is
blank.
Menu settings changed from the
operator panel have no effect.
Action
The operator panel menus are disabled. To enable the menus:
• Turn the printer power Off (O).
• Press and hold
Select
• Release the buttons when
Once the printer finishes powering on, the
• Press until
Menu> Panel Menus
• Press until
Menu> Enable
The Saved message briefly appears and then, the
The CONFIG MENU displays again with
• Press until
Menu> Exit Config Menu
.
Select
Activating Menu Changes
briefly appears. The printer returns to the
If the operator panel menus are password protected, see your system adminis-
trator.
• Turn the printer power Off (O), wait about 10 seconds, and turn the printer
power On (|).
• The
Performing Self Test
When the test is completed, the
If the messages do not display, turn the printer power Off (O) and call Lexmark
Customer Support Center.
Settings in the software application, the printer driver, or the printer utilities are
overriding the settings in the operator panel.
• Change the menu settings from the printer driver, the printer utilities, or the
software application instead of the operator panel.
• Disable the settings in the printer driver, the printer utilities, or the software
application so you can change settings from the operator panel.
and , and then turn the printer power On (|).
Return
Performing Self Test
CONFIG MENU
displays on the second line. Press
displays on the second line. Press
Panel Menu
displays on the second line. Press
briefly appears, and then
Ready
message appears on the operator panel display.
message displays.
Ready
displays.
displays.
Select
.
Select
Enabling Menus displays.
on the second line.
Performing Self Test
state.
175
Display Problems
.