Getting Started; Unpacking - Teledyne T400 User Manual

2. GETTING STARTED

This Section addresses unpacking, connecting, and initializing the instrument, getting an
overview of the menu system, and setting up/configuring the functions.
2.1

UNPACKING

ATTENTION
ATTENTION
Note
Verify that there is no apparent external shipping damage. If damage has occurred, please
advise the shipper first, then Teledyne API.
Included with your instrument is a printed record of the final performance
characterization performed on your instrument at the factory. This record, titled Final
Test and Validation Data Sheet, is an important quality assurance and calibration record
and should be placed in the quality records file for this instrument.
083730400A DCN8130
CAUTION - GENERAL SAFETY HAZARD
To avoid personal injury, always use two persons to lift and carry the
COULD DAMAGE INSTRUMENT AND VOID WARRANTY
Printed Circuit Assemblies (PCAs) are sensitive to electro-static
discharges too small to be felt by the human nervous system. Failure
to use Electro-Static Discharge (ESD) protection when working with
electronic assemblies will void the instrument warranty. Refer to the
manual, Fundamentals of ESD, PN 04786, which can be downloaded
from our website at http://www.teledyne-api.com.
COULD DAMAGE INSTRUMENT AND VOID WARRANTY
Do not operate this instrument without first removing dust plugs from
SAMPLE and EXHAUST ports on the rear panel.
Teledyne API recommends that you store shipping containers and
materials for future use if/when the instrument should be returned to
the factory for repair and/or calibration service. See Warranty
statement in this manual and Return Merchandise Authorization
(RMA) on our Website at http://www.teledyne-api.com.
Teledyne API – Model T400 O
analyzer.
Analyzer
3
19