Table of Contents
Advertisement
2.4.5 U
TILITIES
The Utilities menu has a variety of functions as described next in Table 2-9.
Table 2-9. Utilities Submenu Descriptions
UTILITIES
MENU
Datalog View
Displays the data logs that were configured via the Setup>Data Logging menu. From this list
a log can be selected and filters applied to view the desired data. (For details on setting up
and running the Data Logger, see Section 2.5.1).
Alerts Log
Displays a history of alerts that are triggered by factory-defined and user-defined Events,
such as warnings and alarms (See Section 2.5.2 for Events configuration).
USB Utilities
Serves multiple purposes using a flash drive connected to the instrument's front panel USB
port:
• download data from the instrument's Data Acquisition System (DAS), the Data Logger, to
a flash drive (Section 2.5.1.3)
• update firmware (Section 5.3)
• download a basic operation functionality report (Section 5.3).
Diagnostics
Provides access to various pages that facilitate troubleshooting.
Analog Outputs
Digital Inputs
Digital Outputs
Flow Cal
O3 Gen Cal
Pressure Cal
Config Transfer
2.4.6 S
ETUP
The Setup menu is for configuring the instrument's various programmable features and
functions. Section 2.5 provides details for the menus under Setup.
58
DESCRIPTION
Show the voltage signals for the functions selected and configured in the
Setup>Analog Outputs menu (Section 2.5.8).
Show whether specific available features are turned ON or OFF; for
example, whether or not Maintenance Mode input or Language selection
can be controlled through the front panel, or whether a zero or span
calibration can be activated remotely when an external source is
connected to the rear panel Control In connector.
Show the function of user-specified parameters configured in the
Setup>Digital Outputs menu (Section 2.5.7).
Use to calibrate the sample gas flow reading with actual flow measured
by an external device. (See Section 4.5.2).
Use to calibrate the O3 Generator option
Use
for
compensating
(Section 4.5.1).
Use to transfer instrument configuration from/to other same-model
instruments (Section 2.6)
Teledyne API – Model T400 O
for
changes
in
atmospheric
Analyzer
083730400A DCN8130
3
pressure
Advertisement
Table of Contents
Troubleshooting
