Teledyne T400 User Manual page 5

SAFETY MESSAGES
Important safety messages are provided throughout this manual for the purpose of
avoiding personal injury or instrument damage. Please read these messages carefully.
Each safety message is associated with a safety alert symbol and is placed throughout this
manual; the safety symbols are also located inside the instrument. It is imperative that
you pay close attention to these messages, the descriptions of which are as follows:
For Technical Assistance regarding the use and maintenance of this instrument or any
other Teledyne API product, contact Teledyne API's Technical Support Department:
or access any of the service options on our website at
083730400A DCN8130
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying message
for specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or
the instrument.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the
central safety grounding point for the instrument.
This instrument should only be used for the purpose and in the
manner described in this manual. If you use this instrument in a
manner other than that for which it was intended, unpredictable
behavior could ensue with possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es)!
Telephone: +1 800-324-5190 (toll free) or +1 858-657-9800
Email: api-techsupport@teledyne.com
Teledyne API – Model T400 O
CAUTION
http://www.teledyne-api.com/
Analyzer
3
iii