2.3.4 S
, F
TARTUP
We recommend reading Section 6 to become familiar with the principles of operation.
When the instrument is first started (Section 2.3.4.1, check its functionality
(Section 2.3.4.3) and run an initial calibration (Section 4). Section 2.4 introduces the
menu system, and Section 2.5 provides setup/customization instructions.
2.3.4.1 STARTUP
Upon initial startup, a sequence of status screens (Figure 2-21) appear prior to the Home
page (Figure 2-22).
Upon any startup, this instrument should warm up for approximately one hour before
reliable measurements can be taken.
083730400A DCN8130
C
UNCTIONAL
HECKS
Figure 2-21. Status Screens at Startup
Teledyne API – Model T400 O
,
I
C
AND
NITIAL
ALIBRATION
Analyzer
3
49