Teledyne T400 User Manual page 58

Figure 2-28. Navigating to the Active Alerts Page
Alerts can be configured as either latching (appears in Active Alerts screen when Event is
triggered and must be cleared by the user) or non-latching (Active Alerts screen
continuously updates based on the Event criteria, clearing on its own). See Section 2.5.2.
To clear Alerts from the Active Alerts page, either check individual boxes to choose
specific Alerts, or check the Select All box to choose all Alerts, then press the Clear
Selected button.
When all Alerts are cleared, the Alerts menu tab no longer shows the caution symbol, and
a green LED replaces the caution symbol in the bottom right corner of the interface
(Figure 2-29). However, Alerts can reappear if the conditions causing them are not
resolved. For troubleshooting guidance, refer to Section 5.7.
Figure 2-29. Active Alerts Cleared
Alerts and Events remain recorded in the Utilities>Alerts Log (Figure 2-30).
56 Teledyne API – Model T400 O Analyzer 083730400A DCN8130
3