Teledyne T400 User Manual page 67

•
"turn off" or deactivate the Event without deleting it). An Event must be enabled in order to
use the Visible and the Latching options.
•
it is triggered (it will still be recorded and can be viewed in the Utilities>Alerts Log).To use
this option, the Event must be enabled.
•
conditions that triggered it were to correct themselves. (Latching requires that the user
interact with the Active Alerts screen to manually clear the Alert and internal Event state.
Non-latching allows the entry in the Active Alerts screen and the internal Event state to
continuously update based on the Event criteria, requiring no user interaction to clear the
Alert or Event state).
083730400A DCN8130
Figure 2-38. Event Configuration
allows the choice of whether to track and record the Event (uncheck this box to
allows the choice of whether or not to display the Event in the Alerts page when
allows the choice of whether or not to keep an Event visible even if the
Teledyne API – Model T400 O Analyzer
3
65