Adjusting the White Balance
The color of an object varies slightly depending on the type of light source. To acquire accurate color image
data, adjust the white balance as described below under the light source to be used.
When scanning, we recommend that you use a stable, flicker-free light source (such as a high-frequency fluo-
rescent lamp).
M
emo
The white balance has been adjusted under fluorescent light before shipment.
[Operating Procedure]
1
Set the light source so that the lighting condition is the same as that under which scan
is to be performed.
2
Attach the white balance cap to the VIVID 9i as
illustrated.
3
Press
The MENU view will appear.
4
Press
"WHITE BALANCE".
42
.
to locate the arrow cursor to
STANDARD
HQ ON
3
COLOR OFF
W.B.
DEFAULT
SCSI
5
ENABLED
→
WHITE BALANCE
INITIAL MODE
INITIAL CONDITION
SCSI SETTINGS
INFO
NF ON