Preparation
Installing the Receptor Head
Removing the Receptor Head
Selecting measuring units
The Konica Minolta llluminance Meter allows you to take readings in either Lux (lx.) or Foot-
candle (fcd) units.
Display example
8
1. Attach the receptor head to the main body.
1. Hold down the receptor-head release button and pull the recep-
tor head off.
● Always set the power switch to the OFF position (the " "
side) before attaching or removing the receptor head.
Attaching or removing the head while the power is ON
may generate an error.
1. Set the power switch to " " (OFF), and pull the battery cover
while pressing it down slightly.
2. Remove two AA-size batteries, if it exits.
3. Set the measuring-unit selector to the desired position (lx. or fcd).
4. Pull back those batteries and battery cover.