Table of Contents
Advertisement
Bar Code Reader Installation
3-12
Installation: Preparation for Use
The Bar Code Reader and its mounting bracket are ready to install on the trolley. To
install the Bar Code Reader and its cable mounting bracket on the trolley, complete
the following steps:
Cable
Clamp
Cable
Clamp
Bracket
1.
Fasten the cable clamp bracket to the underside of the rear handle using a
Phillips screw driver and the self tapping screws provided.
NOTE
DO NOT overtighten. Overtightening the screw may cause the screw to
strip and clamp to fail.
Cable
Clamp
Bracket
Cable
Clamp
MAC 5500 resting ECG analysis system
2020299-020
Barcode
Reader
71A, 72A
73A
Revision E
Advertisement
Table of Contents
