Table of Contents
Advertisement
Revision E
Installation: Preparation for Use
3.
Route the cable around the trolley column towards the rear as shown below.
4.
At the front, hold the cable to the side so it clears the front panel as you replace
the panel.
5.
Plug the cable connector into port A then replace the back panel.
6.
Refer to the MAC 5500 Operator's Manual for information on using the
Magnetic Card Reader.
MAC 5500 resting ECG analysis system
2020299-020
Cable Routing
Rear View
34A
77A
70A
3-11
Advertisement
Table of Contents
