Table of Contents
Advertisement
Installing the Optional External Modem Kit
3-8
Installation: Preparation for Use
NOTE
The internal modem is standard for the MAC 5500.
The modem and its mounting bracket comes assembled and ready to install on the
trolley. To install a modem kit on the trolley, complete the following steps:
1.
Find the modem mounting site located under the Acquisition Module support
arm at the rear of the trolley where the kit is to be installed.
2.
Slide the assembly up in place so that the bracket slot catches on the bracket lip.
3.
Tighten the three mounting screws to secure the modem to the trolley.
MAC 5500 resting ECG analysis system
2020299-020
24A, 25A
26A
29A
Revision E
Advertisement
Table of Contents
