Table of Contents
Advertisement
U3042AE08
N5230C RF Interface Cable Connections
Figure 11 on page 15
configured to the PNA-L.
1. Connect the RF interconnect cables, supplied with this option, from the PNA-L to the
test set. Torque each cable to 8 in-lb. Refer to
Z5623-20418 are the short cables and the Z5623-20419 are the long cables.
CAUTION
CAUTION
Table 7
RF Cables
Z5623-20418
Z5623-20418
Z5623-20419
Z5623-20419
Figure 11
2. Connect the PNA-L test set I/O cable (8120-6818) to the test set interface on the rear
panel. Refer to
User's Guide U3042-90002
This Manual:http://www.manuallib.com/agilent/u3042ae08-test-set-user-guide.html
illustrates the setup configuration of the test set and how it should be
Each end of the interconnect RF cables have a different length from the bend.
When connecting the RF Interconnect cables be sure that the longer end from
the bend is connected to the analyzer.
Over torque will cause damage to the test set and may cause connectors to
spin or become loose.
N5230C Interface Cable Connection
From: PNA-L
SOURCE OUT
CPLR ARM
CPLR THRU
RCVR IN
N5230C RF Interface Connections
N5230A 10 MHz to 20 GHz
s
PNA-L Network Analyzer
REF
PORT 1
RCVR
RCVR
CPLR
IN
A IN
THRU
SOURCE
CPLR
SOURCE
OUT
ARM
OUT
Test Set I/O Cable
s
U3042AE08 10 MHz to 20 GHz
MULTIPORT TEST SET
PORT 5
CPLR
SOURCE
ARM
IN
RCVR
CPLR
OUT
THRU
! +20 dBm RF
0VDC
S
R
P5
P6
PORT 9
ACTIVE
+27 dBm (0.5 W) RF 0 VDC AVIOD STATIC
!
DISCHARGE
!
1
Figure 18 on page
Table 7
and
To: Test Set
SOURCE OUT
CPLR ARM
CPLR THRU
RCVR OUT
PORT 2
PORT 3
PORT 4
RCVR
RCVR
CPLR
CPLR
C IN
THRU
B IN
THRU
CPLR
SOURCE
CPLR
SOURCE
ARM
ARM
OUT
OUT
PORT 6
PORT 7
PORT 8
CPLR
SOURCE
CPLR
SOURCE
ARM
IN
ARM
IN
!
RCVR
CPLR
RCVR
CPLR
OUT
THRU
OUT
THRU
! +20 dBm RF
! +20 dBm RF
0VDC
0VDC
S
R
S
R
P8
P11
P9
P12
PORT 10
PORT 11
PORT 12
!
+27 dBm (0.5 W) RF 0 VDC AVIOD STATIC
!
+27 dBm (0.5 W) RF 0 VDC AVIOD STATIC
DISCHARGE
DISCHARGE
CONTROL LINES
VOLTAGE ADJUST
20.
System Setup with N5230C
Figure 11 on page
15. The
RCVR
CPLR
D IN
THRU
Z5623-20419 (long)
CPLR
SOURCE
ARM
OUT
Z5623-20418 (short)
CPLR
SOURCE
ARM
IN
RCVR
CPLR
OUT
THRU
! +20 dBm RF
0VDC
S
R
P14
P15
!
+27 dBm (0.5 W) RF 0 VDC AVIOD STATIC
DISCHARGE
15
Advertisement
Table of Contents
