Table of Contents
Advertisement
U3042AE08
How to Access Multiport Mode
The Option 551 must be installed for Multiport capability. To access the multiport
application select Utility > System > Configure > Multiport Capability. See
Figure 20
Select U3042AE08 (12-Port System) from the test set drop-down menu and select Restart
as a Multiport PNA with this testset. Press OK. The analyzer will restart the network
application with the test set interface features. See
If the U3042E08 is not available in the Testset list, it will be necessary for you to copy the
required test set file to the analyzer hard drive. The current version of the test set files are
available on the web at http://na.tm.agilent.com/multiport. Copy the appropriate file to
c:\program files\Agilent\Network Analyzer\testsets directory.
Figure 21
22
This Manual:http://www.manuallib.com/agilent/u3042ae08-test-set-user-guide.html
Selecting Multiport Mode
U3042AE08 Selection
Controlling the Test Set with N5230C or N5242A
Figure
21.
User's Guide U3042-90002
Figure
20.
Advertisement
Table of Contents
