Gpib Control Mode; Overview Of The Gpib Control - Agilent Technologies U3042AE08 User Manual

U3042AE08
OK:
Applies the settings and closes the dialog box.
Cancel:
Does not apply changes that were made and closes the dialog box.
NOTE

GPIB Control Mode

The GPIB Command Processor feature allows you to send remote commands and data to
the analyzer's rear-panel GPIB connector and test set I/O connector. More information
regarding the GPIB Command Processor can be found in the Help System menu.
• Overview
• How to Access GPIB Command Processor
• GPIB Command Processor Console

Overview of the GPIB Control

The GPIB Command Processor allows you to send address and data to control an external
test set, without needing to create a remote program. The user is required to manually
input address and data using the GPIB Command Processor Console in the Help menu.
• GPIB Command Processor settings can not be saved or recalled.
• Address and data can be written to the GPIB Command Processor and read from the
GPIB Command Processor.
User's Guide U3042-90002
This Manual:http://www.manuallib.com/agilent/u3042ae08-test-set-user-guide.html
Test set I/O Commands can be found in
page 43. The Address and Data commands can be entered into the test set I/O
control.
Controlling the Test Set with N5230C or N5242A
"Test Set I/O Interface Commands" on
35