Agilent Technologies U3042AE08 User Manual page 27

U3042AE08
6. Secure the network analyzer's lower locking feet to the test set upper locking feet, using
the spring–loaded screws on the locking feet. Refer to
analyzer's lower locking feet are not aligned with the screw holes in the test set's upper
locking feet, loosen the screws securing the feet to the instrument slightly to align.
Figure 16 Locking Feet Screws
NOTE
18
This Manual:http://www.manuallib.com/agilent/u3042ae08-test-set-user-guide.html
There are two Lock-Feet kits available. Refer to
and Assistance" on page 68
• Analyzer − 5023-0132 (Kit includes locking feet and screws)
• Test Set − N5242-20138 is the right foot and the N5242-20139 is the left
foot.
• Screw − 0515-2317
Figure
"Agilent Support, Services,
for ordering information.
System Setup with N5242A
16. If the network
User's Guide U3042-90002