Inserting/Ejecting Cartridges From Cas; Inserting Cartridges From Cas; Ejecting Into Cas - Fujitsu ETERNUS LT160 User Manual

Library Operation
3.1.2

Inserting/Ejecting cartridges from CAS

The following explains how to insert a cartridge from CAS using the backup software.

3.1.2.1 Inserting cartridges from CAS

1) Open the magazine door. At this point, make sure that the CAS Opened icon is lit in
2) Put into the magazine the cartridge you want to insert (see
3) Close the magazine door. At this point, make sure that the CAS Opened icon is off.
4) Perform the operation for insertion into the cell using the backup software.

3.1.2.2 Ejecting into CAS

1) If there is no magazine in CAS, first put a magazine in CAS.
2) Perform the operation for ejection into CAS from the backup software.
3) Open the magazine door. At this point, make sure that the CAS Opened icon is lit in
4) Pull out the magazine and remove the ejected cartridge (See
3-8
the icon area of the operator panel.
cartridges into the magazine").
After the CAS Open icon goes out, the library automatically makes an
inventory of magazines. Perform the insertion operation from the
backup software after the inventory operation is completed.
the icon area of the operator panel.
For information about performing the CAS Open operation (to be
performed from the operator panel), see
Door."
cartridges from the magazine").
Remarks:
Remarks:
4.6, "Opening the Magazine
1.1.5.1, "Inserting
1.1.5.2 "Ejecting
C144-E072-01EN