Setting Library Information; Setting Information About The Host Interface - Fujitsu ETERNUS LT160 User Manual

Remote Panel Operation
5) If processing is completed, the system displays a window showing the processing
5.5

Setting Library Information

5.5.1

Setting information about the host interface

The following explains the settings for the interface Target ID and security for connecting
the library device to the host.
1) Click the [Host I/F] button displayed under [Setup] in the menu frame. A window
2) A setting window for the selected adapter is displayed. From this window, settings
5-32
results. This completes the settings.
for selecting the adapter will be displayed.
Figure 5.23 Adapter selection window
Select the adapter to be set and then click the [OK] button.
1. If there is no adapter that can be set due, for example, to adapter
errors, the message "There is no adapter that can be set" is
displayed.
2. Only adapters that can be set are displayed in the window.
for the addressing mode, LOOP ID, and security can be made.
Remarks:
C144-E072-01EN