Fujitsu ETERNUS LT160 User Manual page 12

Important Alert Items
Task
Normal operation
Cleaning
Restarting the library
Troubleshooting
vi
Data loss:
If a drive is used for the load/unload operation, the drive cannot
be used from backup software.
Be sure to stop the operation of backup software before
performing the load/unload operation.
Data loss:
If a drive is used for the load/unload operation, the drive cannot
be used from backup software.
Be sure to stop the operation of backup software before
performing the load/unload operation.
Data loss: Before turning off and then turning on the power
again, consult with the system administrator. Do not turn off
and then turn on the power when the interface is active.
Otherwise, data loss or a hang-up of the host system may occur.
Damage to the library: During troubleshooting, do not
insert a defective tape into another drive. The defective tape
may damage the drive.
Alert message Page
4-40
4-41
6-10
6-11
C144-E072-01EN