Figure 1.19 Internal Door (When Open) - Fujitsu ETERNUS LT160 User Manual

Overview
(1) Opening the internal door
1) Keep the front door open.
2) Rotate the thumbscrews at the upper and lower parts of the door counterclockwise
3) If the two screws come off, pull the handle out to open the internal door
(2) Closing the internal door
1) Push the handle slowly to close the internal door.
2) Fully secure the internal door by rotating the thumbscrews at the upper and lower
1-24
until they come off.
1.19).

Figure 1.19 Internal door (when open)

parts of the door clockwise.
1. When opening or closing the door, do not hold any part other than
the handle.
2. Open or close the internal door slowly. If the internal door is
opened or closed abruptly or such that it is subjected to physical
shock, cartridges mounted inside the internal door may be
knocked out of it.
3. When closing the internal door, secure the internal door firmly
with two thumbscrews. If the internal door is not fully closed, the
robot may not be able to correctly transport cartridges.
Remarks:
(Figure
C144-E072-01EN