ETERNUS LT40 S2 tape library
4.2.4.2
Removing and replacing a magazine using the RMU
To log on, enter the correct password and press the ENTER key.
Ê
Select Operations > Magazines.
Ê
In the next menu you can select the left or right magazine.
Click Release.
Ê
You can now remove the magazine from the library.
4.2.4.3
Inserting tape cartridges Into a magazine
Unlock the magazines and remove them from the tape library
Ê
Ê
Insert cartridges in the magazines.
Ê
Put the magazines back to the library.
Ê
4.2.4.4
Mailslots
Mailslots are used to import/export individual cartridges without interrupting library
operation. The time-consuming inventory of all the cartridges is consequently not required
when a magazine is inserted. Always use the mailslot to import/export cartridges.
Mailslots are always activated in BS2000 operation. Consequently 3 fewer slots are
available for storing cartridges in BS2000 operation. BS2000 can use 9 slots in the left-hand
magazine and 12 slots in the right-hand one.
As soon as the mailslots are enabled, the three associated slots are no longer visible from
BS2000, i.e. the
slots. These three slots are consequently not available to accommodate cartridges.
46
via OCP, see
section "Removing and replacing a magazine using the OCP" on
page
45.
via RMU, see
section "Removing and replacing a magazine using the RMU" on
page
46.
/SHOW-TAPE-STATUS <mn>,INFO=CARTRIDGE
command does not show these
U41861-J-Z126-1-76
Periphery