Referencing Setup Information For The Drive - Fujitsu ETERNUS LT160 User Manual

5.3.4

Referencing setup information for the drive

By clicking the [Drive] button displayed under [Information], setup information for the
drive such as LOOP ID, Vendor ID, Product ID, and WWN can be referenced.
The following information about all drives is displayed:
Vendor ID
Product ID
Addressing Mode
LOOP ID
World Wide Node
Name
World Wide Port
Name
Drive Type
I/F Type
Drive Control
Firmware
Drive Unit Firmware
Serial No.
C144-E072-01EN
Figure 5.16 Drive setup information display window
Display item
Displays the Vendor ID of the drive.
Displays the Product ID of the drive.
Displays the addressing mode (Hard or Soft).
Indicates LOOP ID (If Addressing Mode is Hard).
Displays the WWNN of the drive.
Displays the WWPN of the drive.
Displays the drive type.
Displays the interface type.
Displays the Drive Control firmware version number.
Displays the Drive Unit firmware version number.
Displays the serial number of the drive.
5.3 Referencing Library Information
Explanation
5-23