Setting The Clock - Fujitsu ETERNUS LT160 User Manual

Operator Panel Operation
4.5.4

Setting the clock

If the library is set up for the first time the library clock needs to be set from the operator
panel or remote panel.
The clock is required so that the time can be recorded in the error information.
1) Select the [Time] button from the SETUP menu.
2) For Year, Month, Day, Hour, and Minute, select the [Ten Key] icon and then make
3) Select the [DOWN] button to go to the next window. Set the Time Zone using the
4-36
To enable setup values, the library needs to be restarted.
SETUP menu
+Time
entries using the ten-key pad.
If the entries are completed, select the [OK] button.
Years that can be entered are 2002 to 2037.
arrow buttons.
Table 4.5 lists the values that can be specified.
Remarks:
Remarks:
C144-E072-01EN