Setting The Clock - Fujitsu ETERNUS LT160 User Manual

Remote Panel Operation
2) Set each of the following items:
5.5.4

Setting the clock

The following explains how to set the date and time for the library device.
1) Click the [Date/Time] button displayed under [Setup] in the menu frame to display
5-36
- IP Address <required>: Enter the IP address of this library. Only en-size
numeric characters can be entered.
- Subnet Mask <required>: Enter the subnet mask of this library. Only en-size
numeric characters can be entered.
- Gateway: This item needs to be set if accessed from outside SUB-LAN or
accessed from the browser via a proxy server inside SUB-LAN. Only en-size
numeric characters can be entered.
- NTP Server: Enter the IP address of the NTP server required to set the clock
from the NTP Server. Only en-size numeric characters can be entered.
- DNS Server: Enter the IP address of the DNS server required for remote
support. Only en-size numeric characters can be entered.
- Device Name: Enter a unique device name to represent on the browser.
If not set, the IP address is displayed. Though normally
displayed in white, the color changes to red when an error
occurs in the library. Up to 20 characters can be entered in the
text area. Characters that can be entered are en-size
alphanumeric characters, blank characters, and en-size
symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
1. If a character that is not allowed or an out-of-range value is
entered, an input error message is displayed.
2. To enable the settings of the IP address, subnet mask, gateway,
NTP server, and DNS server, the library device needs to be
restarted.
the date/time setting window.
If the date/time are already set, their values are displayed.
Remarks:
C144-E072-01EN